Drywall Installation in Garland, TX – Residential & Commercial Sheetrock Installation
New construction, room additions, full gut renovations, and commercial buildouts all start at the same place: bare studs that need walls. Garland Expert Drywall handles the complete installation process — hanging, taping, mudding, sanding, and finishing to your specified level — with the kind of precision that only comes from doing this work in North Texas homes and businesses for over 15 years.
Full Installation, Start to Finish
Drywall installation isn’t one step — it’s a sequence, and every stage affects the one after it. We handle all of it:
- Hanging — standard ½-inch gypsum panels for walls, ⅝-inch for ceilings and fire-rated assemblies, 4×8 and 4×12 sheets depending on ceiling height and framing
- Taping and mudding — three-coat joint compound application with feathered edges and properly embedded tape at every seam and corner
- Sanding — smooth, flat surfaces with no ridges, tool marks, or visible seams
- Finishing — to your specified level, from Level 3 through Level 5
The finish level matters more than most homeowners realize. A Level 3 finish is appropriate for textured walls. Level 4 is the standard for most painted residential interiors. Level 5 — a full skim coat over the entire surface — is the correct choice for high-gloss paint, strong side lighting, or any room where imperfections would be visible. We’ll tell you honestly which level your project calls for.
What Separates a Quality Installation from a Problem One
Most drywall complaints — visible seams, cracks that reappear, corners that never look straight — trace back to shortcuts taken during installation rather than the repair stage. Compound applied too thick and not allowed to dry fully between coats. Tape that wasn’t properly embedded in the first coat. Screws driven too deep or too shallow. Panels butted against each other without the proper gap at the floor to allow for seasonal movement — a particularly important detail in North Texas where clay soil expansion and contraction creates ongoing structural micro-movement throughout the year.
We follow a three-coat finishing process on every job: a taping coat to embed joint tape and fill fastener dimples, a second blocking coat to level the surface, and a finish coat for final smoothing before sanding. No skipped coats, no rushed drying times. Corners get metal or paper bead set in compound — not just taped and hoped for. The result is walls that hold up to North Texas conditions and look right under every lighting situation.
Material Selection for North Texas Conditions
Not every wall gets the same panel. Garland’s humidity swings and the moisture risk from our above-average storm exposure mean material selection matters. We install:
- Standard ½-inch gypsum board — bedrooms, living areas, hallways
- ⅝-inch Type X fire-rated drywall — garages attached to living spaces, commercial assemblies, and code-required fire separations
- Moisture-resistant greenboard and purple board — kitchens, laundry rooms, and areas with elevated humidity
- Cement board — wet areas, shower surrounds, and tile backing
- Soundproof / acoustic drywall — home offices, media rooms, multi-family units
Residential and Commercial — Same Standard
Whether you’re finishing a room addition in Firewheel, a tenant improvement off I-30, or a multi-unit project in the greater Dallas area, we bring the same process and the same quality standard to every job. We work directly with homeowners, general contractors, and property managers, and we’re experienced with commercial timelines and inspection requirements.
Free, itemized written estimates. Licensed and insured in Texas. Serving Garland, TX and the greater Dallas area since 2009.
Get Your FREE Estimate
frequently asked questions
Not Sure What Your Project Actually Needs?
Every installation is different — room size, ceiling height, finish level, and material type all affect the outcome. If you don’t see your question answered here, call us — we’re happy to walk through the details before you commit to anything.
Texas drywall installation typically runs $1.50 to $3.50 per square foot for full installation including materials, labor, and finishing — one of the more competitive markets in the country. A standard 12×12 room generally falls in the $750 to $1,750 range depending on ceiling height, finish level, and panel type. We provide free, itemized written estimates so you know exactly what you’re paying for before any work begins.
Level 3 is appropriate for walls receiving heavy texture. Level 4 is the standard finish for most painted residential interiors — smooth, flat, and ready for paint. Level 5 adds a full skim coat over the entire surface and is the correct choice for high-gloss paint, strong side lighting, or high-end rooms where any surface imperfection would be visible. We’ll recommend the right level for your specific project and explain why.
A single room typically takes 2 to 4 days from hanging through final sanding — most of that time is drying time between compound coats rather than active labor. A full home installation of 2,000 square feet generally runs 5 to 10 days depending on crew size, ceiling height, and finish level. We provide a clear timeline with every estimate.
Attached garages and fire-separation walls require ⅝-inch Type X fire-rated drywall under Texas residential building codes. It provides a one-hour fire resistance rating and is significantly more dense than standard ½-inch gypsum board. We select the correct panel type for every application — including moisture-resistant greenboard, cement board, and acoustic drywall where the situation calls for it.
Yes, and we do it regularly. We use dust-control systems on every job to protect your flooring, furniture, and HVAC from drywall dust — one of the more invasive byproducts of any installation project. We work room by room where needed and keep you informed throughout so there are no surprises.
Yes. We work with general contractors, property managers, and business owners on office buildouts, retail tenant improvements, and multi-unit residential projects throughout the Dallas-Fort Worth area. We’re familiar with commercial inspection requirements, fire-rated assembly specifications, and the tighter timelines that commercial projects typically demand.